Lubrication of equipment is a complex and critical part of meat and poultry processing. One of the major lubrication challenges is the stringent sanitation processes. Read how a Russian sausage factory benefits from switching to Anderol® FGCS-2 HD.
In a large pulp and paper manufacturer, the maintenance department was looking to solve lubrication challenges in the bearings in both the wet and dry parts of their process.
A glass manufacturer reached out to one of our distributors in need of a solution for their problem. In the demanding environment of glass mouth cutting, high temperatures pose significant challenges. The extreme heat that is used during the glass cutting process was causing carbon residues to form on the spindle shafts in the glass mouth cutting machines.
An alfalfa pellet manufacturer in Spain suffered frequent failures and breakdowns in their alfalfa pellet presses, leading to high costs of maintenance and spare parts.  Alfalfa is highly fibrous and resists to compression. The pellet mill equipment is working under heavy-duty circumstances with high loads, steam, and heat involved.
The grease used to lubricate the drill rods should be water-resistant, be able to endure the heavy loads and be NSF H1 certified. This certification is particularly important as it confirms the grease's safety for use in an environment where the water extracted is intended for consumption.
Large scale refrigeration station
The large-scale refrigeration facilities used in industrial refrigeration are using refrigerants and are fitted with oil separators as the lubricant is meant to stay in the compressor element. It is important to use a lubricant that is completely non-miscible with the coolant, and one with a low vapor pressure to avoid or minimize oil entrainment into the circuit.
A Turkish manufacturer of kitchen and home appliances noticed that there their blenders and mixers were making too much noise. While conducting an inspection to find the root cause of the problem, they noticed wear on the metal sintered bearings in the mixer and blender shafts.
sintered bearings anderol 465
The type of lubricant that is used in a sintered bearing has a direct impact on the lifespan of the bearing and how well it works in its application. A Chinese powder metallurgy parts manufacturer succeeds by switching to Anderol® 465.
car painting
Anderol® 6220 delivers 70 percent savings for automotive paint line
Anderol® FGCS-2 HD in pellet mill lubrication increases productivity
Anderol 6220
Switching to Anderol® 6220 gear oil improves performance and reduces costs
aluminum foil
A Chinese aluminium foil maker specializing in the production of pharmaceutical and household aluminum foils has recently made the switch to Anderol® DDO. The 3H food grade dough divider oil typically used for bakery applications, can also be used in the forming and rolling of aluminium foil. In this case it has been used to coat to the aluminum foil through an electrostatic oiling process ensuring consistent uniformity of the coated foil.
high temperature chain oil bakery
Helps bakery increase production capacity and extend equipment life
Powered by  GDPR Cookie Compliance
Privacy information

This website uses cookies to optimize/enhance your user experience. Cookie information is being stored in your browser helping the websites to recognize you on your next visit while analyzing which content might be the most appropriate or interesting for you.