H1 lubricants are food-grade lubricants used in food-processing environments where there is the possibility of incidental food contact. To gain H1 approval, lubricant manufacturers have to prove that all of the ingredients in the formulation are allowable substances in accordance with the Guidelines of Security Code of Federal Regulations (CFR)
H2 lubricants are used on equipment and machine parts in locations in the plant where absolutely no contact with a food (or food related product) is possible. H2 lubricants are also used as a release agent on machine parts or equipment.
H3 lubricants (or soluble oils) are used to clean and prevent against corrosion/rust on equipment, such as hooks and trolleys. These are food-grade lubricants, but must be wiped off prior to use of the equipment. .
HT1 are heat transfer oils used in primary and secondary heating and cooling systems in food processing facilities where there is the possibility of incidental food contact.
3H are non-toxic, release agents (mostly vegetable oils) used on equipment where food contact is inevitable, for example on seals, mincer plates and blades.
Using a reputable lubricant supplier is critical for food processing operations particularly for H1 lubricants which have restrictions on the types of additives allowed. These restrictions should not limit performance, but you need to understand the limit of the lubricant which is where a reputable and trusted supplier is invaluable
A reputable supplier can also assist with implementing an HACCP plan by identifying points throughout the production and packaging process where the product could face incidental exposure to a lubricant. They can offer guidance on maintaining documentation, minimizing lubricant usage without decreasing performance and establishing control procedures.
In addition to the H1, H2 and H3 product codes the ISO 21469 (a product level certification) standard exists to demonstrate that a lubricant is manufactured in a hygienic environment, using both best practices and the safest ingredients, and is the highest accolade that a food grade lubricant manufacturer can achieve.
Anderol has a wide portfolio of food grade lubricants for all sectors within the food and beverage industry including bakery, meat, dairy and confectionary. You can find Anderol’s full NSF listings here
At Anderol we understand the challenges that many food processors face when managing their lubricant inventory. Our technical professionals within Anderol and our wider distributor network are available to offer support and advice on your specific application needs.