Synthetic Lubrication Oil - Anderol 465 is an ISO Grade 68 (nominal), synthetic-di-ester based lubricant that is formulated to offer extended lubrication over a wide temperature range, resist gumming and speed fluctuations and to minimize wear.
Advanced Technology Gear and Bearing Oils, EP - Anderol 5150 PLUS EP Synthetic Gear Oil is particularly suited for gear applications requiring high micro pitting resistance. It is formulated using a specific balance of synthetic base stocks in order to provide performance greatly superior to conventional petroleum oils. Anderol 5150 PLUS EP is fully compatible with petroleum based oils while offering significantly improved load carrying ability, excellent wear and rust protection, higher viscosity indices, higher flash points, low pour points, cleaner running systems, and improved thermal and oxidative stability which can extend lubricant life reducing maintenance costs. - Anderol 5150 PLUS EP meets or exceeds the requirements of:• AISE 224 (formerly USS 224)• ANSI/AGMA 9005-E02 (EP)• David Brown S1.53.106• DIN 51517-3• ISO 12925-1:1996 (type CKC)
Synthetic Gear and Bearing Lubricant - Anderol 5150 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micro pitting resistance. The PAO based product gives superior advantages to the mineral oil based products, especially with regards to low pour point, oxidation stability and energy consumption. - Anderol 5000 XEP range is available in the grades ISO VG 150, 220, 320, 460, 680 and 1000. - Anderol 5150 XEP meets or exceeds the requirements of:ANSI/AGMA 9005 (table 3)AISE 224 (formerly USS 224)DIN 51.517 Cincinnati P-59
Advanced Technology Gear and Bearing Oils, EP - Anderol 5220 PLUS EP Synthetic Gear Oil is particularly suited for gear applications requiring high micro pitting resistance. It is formulated using a specific balance of synthetic base stocks in order to provide performance greatly superior to conventional petroleum oils. Anderol 5220 PLUS EP is fully compatible with petroleum based oils while offering significantly improved load carrying ability, excellent wear and rust protection, higher viscosity indices, higher flash points, low pour points, cleaner running systems, and improved thermal and oxidative stability which can extend lubricant life reducing maintenance costs. - Anderol 5220 PLUS EP meets or exceeds the requirements of:• AISE 224 (formerly USS 224)• ANSI/AGMA 9005-E02 (EP)• David Brown S1.53.106• DIN 51517-3• ISO 12925-1:1996 (type CKC)
Synthetic Gear and Bearing Lubricant - Anderol 5220 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micro pitting resistance. The PAO based product gives superior advantages to the mineral oil based products, especially with regards to low pour point, oxidation stability and energy consumption. - Anderol 5000 XEP range is available in the grades ISO VG 150, 220, 320, 460, 680 and 1000. - Anderol 5220 XEP meets or exceeds the requirements of:ANSI/AGMA 9005 (table 3)AISE 224 (formerly USS 224)DIN 51.517 Cincinnati P-59
Advanced Technology Gear and Bearing Oils, EP - Anderol 5320 PLUS EP Synthetic Gear Oil is particularly suited for gear applications requiring high micro pitting resistance. It is formulated using a specific balance of synthetic base stocks in order to provide performance greatly superior to conventional petroleum oils. Anderol 5320 PLUS EP is fully compatible with petroleum based oils while offering significantly improved load carrying ability, excellent wear and rust protection, higher viscosity indices, higher flash points, low pour points, cleaner running systems, and improved thermal and oxidative stability which can extend lubricant life reducing maintenance costs. - Anderol 5320 PLUS EP meets or exceeds the requirements of:• AISE 224 (formerly USS 224)• ANSI/AGMA 9005-E02 (EP)• David Brown S1.53.106• DIN 51517-3• ISO 12925-1:1996 (type CKC)
Synthetic Gear and Bearing Lubricant - Anderol 5320 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micro pitting resistance. The PAO based product gives superior advantages to the mineral oil based products, especially with regards to low pour point, oxidation stability and energy consumption. - Anderol 5000 XEP range is available in the grades ISO VG 150, 220, 320, 460, 680 and 1000. - Anderol 5320 XEP meets or exceeds the requirements of:ANSI/AGMA 9005 (table 3)AISE 224 (formerly USS 224)DIN 51.517 Cincinnati P-59
Advanced Technology Gear and Bearing Oils, EP - Anderol 5460 PLUS EP Synthetic Gear Oil is particularly suited for gear applications requiring high micro pitting resistance. It is formulated using a specific balance of synthetic base stocks in order to provide performance greatly superior to conventional petroleum oils. Anderol 5460 PLUS EP is fully compatible with petroleum based oils while offering significantly improved load carrying ability, excellent wear and rust protection, higher viscosity indices, higher flash points, low pour points, cleaner running systems, and improved thermal and oxidative stability which can extend lubricant life reducing maintenance costs. - Anderol 5460 PLUS EP meets or exceeds the requirements of:• AISE 224 (formerly USS 224)• ANSI/AGMA 9005-E02 (EP)• David Brown S1.53.106• DIN 51517-3• ISO 12925-1:1996 (type CKC)
Synthetic Gear and Bearing Lubricant - Anderol 5460 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micro pitting resistance. The PAO based product gives superior advantages to the mineral oil based products, especially with regards to low pour point, oxidation stability and energy consumption. - Anderol 5000 XEP range is available in the grades ISO VG 150, 220, 320, 460, 680 and 1000. - Anderol 5460 XEP meets or exceeds the requirements of:ANSI/AGMA 9005 (table 3)AISE 224 (formerly USS 224)DIN 51.517 Cincinnati P-35
Advanced Technology Gear and Bearing Oils, EP - Anderol 5680 PLUS EP Synthetic Gear Oil is particularly suited for gear applications requiring high micro pitting resistance. It is formulated using a specific balance of synthetic base stocks in order to provide performance greatly superior to conventional petroleum oils. Anderol 5680 PLUS EP is fully compatible with petroleum based oils while offering significantly improved load carrying ability, excellent wear and rust protection, higher viscosity indices, higher flash points, low pour points, cleaner running systems, and improved thermal and oxidative stability which can extend lubricant life reducing maintenance costs. - Anderol 5680 PLUS EP meets or exceeds the requirements of:• AISE 224 (formerly USS 224)• ANSI/AGMA 9005-E02 (EP)• David Brown S1.53.106• DIN 51517-3• ISO 12925-1:1996 (type CKC)
Synthetic Gear and Bearing Lubricant - Anderol 5680 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micro pitting resistance. The PAO based product gives superior advantages to the mineral oil based products, especially with regards to low pour point, oxidation stability and energy consumption. - Anderol 5000 XEP range is available in the grades ISO VG 150, 220, 320, 460, 680 and 1000. - Anderol 5680 XEP meets or exceeds the requirements of:ANSI/AGMA 9005 (table 3)AISE 224 (formerly USS 224)DIN 51.517
Synthetic Gear and Bearing Lubricant - Anderol 5999 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micro pitting resistance. The PAO based product gives superior advantages to the mineral oil based products, especially with regards to low pour point, oxidation stability and energy consumption. - Anderol 5000 XEP range is available in the grades ISO VG 150, 220, 320, 460, 680 and 1000. - Anderol 5999 XEP meets or exceeds the requirements of:ANSI/AGMA 9005 (table 3)AISE 224 (formerly USS 224)DIN 51.517
